The Greenwood Conference Room
The room is equipped with a 58″ TV that can be connected for meetings. HDMI cords, adapters, and the TV remote should be left on the conference table.
HDMI cords can be used to screenshare via hardwiring. Adapters may be necessary from HDMI to TV to PC/Mac. Please check your computer’s connections prior to your meeting.
Connect A PC
To Hardwire to PC (BEST AND EASIEST OPTION)
- Plug the HDMI cord (from the TV) into your PC with any needed adapter. A USB-C adapter is tethered to the HDMI cord from the TV and may need to be disconnected to plug in your PC.
- Using the TV remote press the input button and navigate to “Computer HDMI-1” (computer icon).
- Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
- You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.
- When you are finished, please leave any borrowed adapters and HDMI cords in the conference room.
To Wirelessly Cast from PC (only works with some PC’s)
- On your PC, make sure your Wi-Fi is on AND that your Bluetooth is on.
- Make sure you are on the iThrive Member Plus network.
- Turn on TV and make sure you are on the Home Screen, by pressing the Home Icon button on the TV Remote.
- Cast from your PC and Select “Greenwood Room”
Use the TV remote to “Always Allow” casting from your PC, if prompted.
- You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.
Connect a Mac
To Wirelessly Cast from Mac
- Make sure you are on the iThrive Member Plus network.
- On your MAC, make sure your Wi-Fi is on AND that your Bluetooth is on.
- Turn on TV and press the Home button from the TV remote.
- Cast from your Mac and Select “Greenwood Room”.
Input the 4-digit code from the TV into the Airplay code box on your Mac, if prompted.
You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.
To Hardwire from Mac
- Plug the HDMI cord (from the TV) into your Mac with any needed adapter. A USB-C adapter is tethered to the HDMI cord from the TV.
- Turn on TV and make sure you are on the Home Screen, by pressing the Home Icon button. Change the Source to “COMPUTER – HDMI-1” by toggling to the right and selecting the Computer Icon with the TV Remote.
- Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connections can be fussy, so just replug it in, if it doesn’t show up on the TV.
- You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.
- When you are finished, please leave any borrowed adapters and HDMI cords in the conference room.
The Glenside Conference Room
The room is equipped with a 65″ TV that can be connected for meetings. HDMI cords, adapters, and the TV remote should be left on the conference table.
HDMI cords can be used to screenshare via hardwiring. Adapters may be necessary from HDMI to TV to PC/Mac. Please check your computer’s connections prior to your meeting.
Connect A PC
To Hardwire to PC (BEST AND EASIEST OPTION)
- Plug the HDMI cord (from the TV) into your PC with any needed adapter. A USB-C adapter is tethered to the HDMI cord from the TV and may need to be disconnected to plug in your PC.
- Using the TV remote, press the Input button and navigate to “HDMI-3 Wired”
- Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
- You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.
- When you are finished, just unplug the adapter. Please leave any borrowed adapters and HDMI cords in the conference room.
To Wirelessly Cast from PC (only works with some PC’s)
- On your PC, make sure your Wifi is on AND that your Bluetooth is on.
- Make sure you are on the iThrive Member Plus network
- Turn on TV with the Roku Remote.
- Use the Roku Remote and make sure you are on the Home Screen, by pressing the Home Icon button. If needed, change the TV Source to “COMPUTER – HDMI-1” by toggling to the right and selecting the Computer Icon with the TV Remote.
- Cast from your PC and Select “Greenwood Room”.
Use the TV remote to “Always Allow” casting from your PC.
- You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.
Connect a Mac
To Wirelessly Cast from Mac
- On your Mac, make sure your Wi-Fi is on AND that your Bluetooth is ON.
- Make sure you are on the iThrive Member Plus network.
- Turn on the TV with the Roku Remote.
- Press the input button and select “Roku Wireless”.
- Use the Roku remote and make sure you are on the Home Screen, by pressing the Home Icon button.
- Cast from your Mac and Select “Greenwood Room” \
- Input the code from the TV into the Airplay code box, if prompted.
- You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.
To Hardwire from Mac
- Plug the HDMI cord (from the TV) into your PC with any needed adapter. A USB-C adapter is tethered to the HDMI cord from the TV and may need to be disconnected to plug in your PC.
- Using the TV remote, press the Input button and navigate to “HDMI-3 Wired”
- Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connections can be fussy, so just replug it in, if it doesn’t show up on the TV.
- You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.
- When you are finished, just unplug the adapter. Please leave any borrowed adapters and HDMI cords in the conference room.
