Fraud Blocker Connect to Conference Room TV's | iThrive Space

Connect to Conference Room TV’s

Click Location for Directions

40 Lloyd Ave, Malvern - iThrive Conference Room - BLDG 4

Connect A PC – Options to Wirelessly Cast or Hardwire to TV in the Room

To Hardwire to PC (BEST AND EASIEST OPTION) –

    • Plug HDMI cord (near the conference phone) into the your PC or needed adapter
    • Using the TV remote, navigate to Inputs – HDMI1
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.


To Wirelessly Cast from PC –

    • On your PC, make sure you are on the “iThrive Member Plus” WiFi network (password: Uncommon++) AND that your Bluetooth is ON.
    • Turn on TV and navigate across the top menu to Settings (the Gear icon) – Displays & Settings – Enable Display Mirroring
    • On your PC, press the Windows button + k
    • Select “Matthew’s 2nd TV”


Connect a Mac – Options to Cast or Hardwire to TV in the Room

To Hardwire from Mac (BEST AND EASIEST OPTION) –

    • On your Mac, plug the HDMI cord (near the conference phone) into the correct adapter for your computer.  Newer Macs will use the HDMI to USB-C adapter directly into your Mac.  There should be an adapter in the room.
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.


To Wirelessly Cast from Mac –

    • On your Mac, make sure you are on “iThrive Member Plus” WiFi network (password: Uncommon++)  AND that your Bluetooth is ON.
    • Turn on TV and navigate across the top menu to the “AirShare” app using the TV Remote.
    • On your Mac, go to System Preferences – Displays –  “Add a Display“ button – Choose the display code shown on the TV
    • You may be prompted to add a pin code from the TV.  
    • Note: You may have to change the Airplay Screen to “Use as: Mirror for Built-in Retina Display” with the “Display Settings” button
    • When you are finished, hit “Disconnect” in Display Settings for the Airplay Screen (vs Build-In Screen).
    • Note: If you have connected to this TV previously, you may be able to go straight to System Preferences – Displays – “Add a Display” button and choose the code for this TV.

Ambler Yards - iThrive Main Conference Room - BLDG 4

Connect A PC – Options to Wirelessly Cast or Hardwire to TV in the Room

To Hardwire to PC (BEST AND EASIEST OPTION) –

    • Plug HDMI cord (near the conference phone) into the your PC or needed adapter
    • Using the TV remote, navigate to Inputs – HDMI1
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.


To Wirelessly Cast from PC –

    •  For Wireless Share, Cast your computer to “iThrive Conference Room Wireless Share”. Make sure the tv is set to the source “HDMI2/DVI PC”. If needed, change the source with the Samsung remote.

Connect a Mac – Options to Cast or Hardwire to TV in the Room

To Hardwire from Mac

    • On your Mac, plug the HDMI cord (near the conference phone) into the correct adapter for your computer.  Newer Macs will use the HDMI to USB-C adapter directly into your Mac.  There should be an adapter in the room.
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.


To Wirelessly Cast from Mac –

    • For Wireless Share, Screen mirror your computer to “iThrive Conference Room Wireless Share”. Make sure the tv is set to the source “HDMI2/DVI PC”. If needed, change the source with the Samsung remote.

 

To use the Conference Room Camera – 

Connect the long USB Cord to your computer coming from the back of the TV. An adapter may be required. Change the camera in your meeting software to “WyreStorm Halo VX10”. Do not unplug anything from the back of the TV.


Note on the Sound: The sound comes through the meeting camera and is NOT controlled by the TV remotes, when using this device. The volume is control by the audio settings in your meeting software or computer settings.

Ambler Yards - Main iThrive Coworking Floor TV - BLDG 4

Connect A PC 

To Wirelessly Cast from PC –

    • On your PC, make sure you are on the “iThrive Member Plus” WiFi network (password: Uncommon++) AND that your Bluetooth is ON.
    • Turn on TV and navigate across the top menu to Settings (the Gear icon) – Displays & Settings – Enable Display Mirroring
    • On your PC, press the Windows button + k
    • Select “iThriveCoworkingMain“.”


Connect a Mac


To Wirelessly Cast from Mac –

    • On your Mac, make sure you are on “iThrive Member Plus” WiFi network (password: Uncommon++)  AND that your Bluetooth is ON.
    • Turn on TV and navigate across the top menu to the “AirShare” app using the TV Remote.
    • On your Mac, go to System Preferences – Displays –  “Add a Display“ button – Choose the display “iThriveCoworkingMain“.
    • You may be prompted to add a pin code from the TV.  
    • Note: You may have to change the Airplay Screen to “Use as: Mirror for Built-in Retina Display” with the “Display Settings” button
    • When you are finished, hit “Disconnect” in Display Settings for the Airplay Screen (vs Build-In Screen).
    • Note: If you have connected to this TV previously, you may be able to go straight to System Preferences – Displays – “Add a Display” button and choose the code for this TV.

Ambler Yards - Conference Rooms in the Meeting and Amenities Suite - BLDG 18

TV’s are available in the AMCHEM and BASF Conference Rooms. HDMI cords can be used to screenshare via hardwiring.  Adapters may be necessary from HDMI from TV to PC/Mac. Please check your connections prior to your meeting.



BASF Room

Connect A PC – Options to Wirelessly Cast or Hardwire to TV in the Room

To Hardwire to PC (BEST AND EASIEST OPTION) –

    • Plug HDMI cord (near the conference phone) into the your PC or needed adapter
    • Using the TV remote, navigate to Inputs – HDMI1
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.


To Wirelessly Cast from PC –

    • On your PC, make sure your Wifi is on AND that your Bluetooth is ON.
    • Turn on TV and change the Source to “Screen Mirroring” with the “Source” Button on the TV Remote
    • On your PC, press the Windows button + k
    • Select “Samsung 55 BASF”


Connect a Mac – Options to Cast or Hardwire to TV in the Room

To Hardwire from Mac (BEST AND EASIEST OPTION) –

    • On your Mac, plug the HDMI cord (near the conference phone) into the correct adapter for your computer.  Newer Macs will use the HDMI to USB-C adapter directly into your Mac.  There should be an adapter in the room.
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.


AMCHEM Room

Connect A PC – Options to Wirelessly Cast or Hardwire to TV in the Room

To Hardwire to PC (BEST AND EASIEST OPTION) –

    • Turn on TV.
    • On your PC, plug the HDMI cord (near the conference phone) into the correct adapter for your computer or directly into your HDMI port on your PC.  
    • You may have to press the “OK” button to change the source to HDMI2, if the TV is currently using another source.  If you miss the prompt on the TV, just use the source button (top righthand button on the remote) to change the source to HDMI2.
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.


To Wirelessly Cast from PC –

    • On your PC, make sure your Wifi is on AND that your Bluetooth is ON.
    • Turn on TV and change the Source to “Screen Mirroring” with the “Source” Button on the TV Remote (top righthand button on TV remote)
    • On your PC, press the Windows button + k
    • Select “[LG] TV AMCHEM Room”


Connect a Mac – Options to Cast or Hardwire to TV in the Room

To Hardwire from Mac (BEST AND EASIEST OPTION) –

    • Turn on TV.
    • On your Mac, plug the HDMI cord (near the conference phone) into the correct adapter for your computer.  Newer Macs will use the HDMI to USB-C adapter directly into your Mac.  There should be an adapter in the room.
    • You may have to press the “OK” button to change the source to HDMI2, if the TV is currently using another source.  This can also be done, if you miss the prompt.  Press the Home button on the TV remote and navigate to HDMI2 with the arrow buttons.
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.

The Training Room

Connect your computer to HDMI-1 with HDMI Cord.  The input is labeled “Computer”.  The tv should already be on HDMI-1, but use the TV remote to toggle to the it, if not.

Use an adapter going from the HDMI to your computer, if needed.  There is an adapter to USB-C in the room. Please leave all cords and adapters in the room when you leave.

Ambler Yards Community Room in the Meeting and Amenities Suite - BLDG 18

Hardwire from PC and Mac

An HDMI cord can be used to screenshare via hardwiring.  Adapters may be necessary from HDMI from TV to PC/Mac. Please check your connections prior to your meeting.

To Hardwire to PC (BEST AND EASIEST OPTION) –

    • Plug HDMI cord (behind the tv with a open end) into the your PC or needed adapter
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.


To Wirelessly Cast from PC –

    • On your PC, make sure your Wifi is on AND that your Bluetooth is ON.
    • Turn on TV with small black remote.
    • On your PC, press the Windows button + k
    • Select “[TV] Samsung (70in) Community Room”


Connect a Mac – Options to Cast or Hardwire to TV in the Room

To Hardwire from Mac –

    • On your Mac, plug the HDMI cord (behind the tv with a open end) into the correct adapter for your computer.  Newer Macs will use the HDMI to USB-C adapter directly into your Mac.  There should be an adapter in the room.
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.
Wyncote Conference Rooms - Greenwood Room & Glenside Room

The Greenwood Conference Room

The room is equipped with a 58″ TV that can be connected for meetings. HDMI cords, adapters, and the TV remote should be left on the conference table.

HDMI cords can be used to screenshare via hardwiring.  Adapters may be necessary from HDMI to TV to PC/Mac. Please check your computer’s connections prior to your meeting.

 

Connect A PC 

To Hardwire to PC (BEST AND EASIEST OPTION)

    • Plug the HDMI cord (from the TV) into your PC with any needed adapter.  A USB-C adapter is tethered to the HDMI cord from the TV and may need to be disconnected to plug in your PC.
    • Using the TV remote press the input button and navigate to “Computer HDMI-1” (computer icon).
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.
    • When you are finished, please leave any borrowed adapters and HDMI cords in the conference room.

To Wirelessly Cast from PC (only works with some PC’s)

    • On your PC, make sure your Wi-Fi is on AND that your Bluetooth is on.
    • Make sure you are on the iThrive Member Plus network.
    • Turn on TV and make sure you are on the Home Screen, by pressing the Home Icon button on the TV Remote.
    • Cast from your PC and Select “Greenwood Room” 
    • Use the TV remote to “Always Allow” casting from your PC, if prompted.

    • You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.

 

Connect a Mac

To Wirelessly Cast from Mac

    • Make sure you are on the iThrive Member Plus network.
    • On your MAC, make sure your Wi-Fi is on AND that your Bluetooth is on.
    • Turn on TV and press the Home button from the TV remote.
    • Cast from your Mac and Select “Greenwood Room”.
    • Input the 4-digit code from the TV into the Airplay code box on your Mac, if prompted.

    • You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.

To Hardwire from Mac

    • Plug the HDMI cord (from the TV) into your Mac with any needed adapter.  A USB-C adapter is tethered to the HDMI cord from the TV.
    • Turn on TV and make sure you are on the Home Screen, by pressing the Home Icon button.  Change the Source to “COMPUTER – HDMI-1” by toggling to the right and selecting the Computer Icon with the TV Remote.  
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connections can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.
    • When you are finished, please leave any borrowed adapters and HDMI cords in the conference room.

The Glenside Conference Room

The room is equipped with a 65″ TV that can be connected for meetings. HDMI cords, adapters, and the TV remote should be left on the conference table.

HDMI cords can be used to screenshare via hardwiring.  Adapters may be necessary from HDMI to TV to PC/Mac. Please check your computer’s connections prior to your meeting.


 

Connect A PC 

To Hardwire to PC (BEST AND EASIEST OPTION) 

    • Plug the HDMI cord (from the TV) into your PC with any needed adapter.  A USB-C adapter is tethered to the HDMI cord from the TV and may need to be disconnected to plug in your PC.
    • Using the TV remote, press the Input button and navigate to “HDMI-3 Wired”
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.

To Wirelessly Cast from PC (only works with some PC’s)

    • On your PC, make sure your Wifi is on AND that your Bluetooth is on.
    • Make sure you are on the iThrive Member Plus network
    • Turn on TV with the Roku Remote. 
    • Use the Roku Remote and make sure you are on the Home Screen, by pressing the Home Icon button.  If needed, change the TV Source to “COMPUTER – HDMI-1” by toggling to the right and selecting the Computer Icon with the TV Remote.  
    • Cast from your PC and Select “Greenwood Room”.
    • Use the TV remote to “Always Allow” casting from your PC.

    • You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.

 

Connect a Mac

To Wirelessly Cast from Mac

    • On your Mac, make sure your Wi-Fi is on AND that your Bluetooth is ON.
    • Make sure you are on the iThrive Member Plus network.
    • Turn on the TV with the Roku Remote.  
    • Press the input button and select “Roku Wireless”.  
    • Use the Roku remote and make sure you are on the Home Screen, by pressing the Home Icon button.  
    • Cast from your Mac and Select “Greenwood Room” \
    • Input the code from the TV into the Airplay code box, if prompted.
    • You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.

To Hardwire from Mac 

    • Plug the HDMI cord (from the TV) into your PC with any needed adapter. A USB-C adapter is tethered to the HDMI cord from the TV and may need to be disconnected to plug in your PC.
    • Using the TV remote, press the Input button and navigate to “HDMI-3 Wired”
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connections can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • You can choose to Mirror your Display from your computer or create an Extended Screen in your computer’s Settings under Displays.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.
  •  
POP UP! Wyncote Conference Rooms - The old Greenwood & The Fishbowl

The Greenwood Conference Room

The room is equipped with Logitech Rally Plus Video Video Conference Equipment (a premium Ultra-HD ConferenceCam system with automatic camera control). One TV’s is permanently in the large conference room, which can be used with or without the room’s video conference equipment. There is second TV on wheels available.  Please request it during booking, to assure it will be in the room. All connection cords, the TV remote (controls both TV’s) and camera remote are located on the conference table. HDMI cords can be used to screenshare via hardwiring.  Adapters may be necessary from HDMI from TV to PC/Mac and USB to Video Camera.  Please check your computer’s connections prior to your meeting.
  • The labeled USB Cord is for the Logitech Rally Plus Video Video Conference Equipment.
  • The HDMI 1 Cord is for the television labeled “Screen 1” that is permanently in the room.
  • The HDMI 2 Cord is for the second screen, labeled “Screen 2”.  If you are using both screens, take the time to connect and arrange your screens to your preferences prior to your meeting.

Connect A PC 

To Hardwire to PC (BEST AND EASIEST OPTION) –
    • Plug HDMI cord (on the conference table) into the your PC or needed adapter
    • Using the TV remote, navigate to Inputs – HDMI1
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.
To Wirelessly Cast from PC (Screen 1 only) –
    • On your PC, make sure your Wifi is on AND that your Bluetooth is ON.
    • Turn on TV and change the Source to “Screen Mirroring” with the “Source” Button on the TV Remote
    • On your PC, press the Windows button + k
    • Select “Greenwood1

Connect a Mac

To Hardwire from Mac (BEST AND EASIEST OPTION) –
    • On your Mac, plug the HDMI cord (on the conference table) into the correct adapter for your computer.  Newer Macs will use the HDMI to USB-C adapter directly into your Mac.  There should be an adapter in the room.
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connections can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.

The Fishbowl Conference Room

The Fishbowl room at Wyncote is equipped with a Logitech Video Conferencing Rally Camera (a premium PTZ camera with Ultra-HD imaging system and automatic camera control) and a Large Screen TV. The TV can be used with or without the room’s Video Conferencing Camera. Please check your connections prior to your meeting.




Connect A PC Options to Wirelessly Cast or Hardwire to TV in the Room To Hardwire to PC (BEST AND EASIEST OPTION) –
    • Plug HDMI cord (near the conference phone) into the your PC or needed adapter
    • Using the TV remote, navigate to Inputs – HDMI1
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.

Connect a Mac – Options to Cast or Hardwire to TV in the Room

To Hardwire from Mac (BEST AND EASIEST OPTION) –
    • On your Mac, plug the HDMI cord (near the conference phone) into the correct adapter for your computer.  Newer Macs will use the HDMI to USB-C adapter directly into your Mac.  There should be an adapter in the room.
    • Troubleshooting: Give it 15 seconds to cycle to the TV. Sometimes the connection can be fussy, so just replug it in, if it doesn’t show up on the TV.
    • When you are finished, just unplug the adapter.  Please leave any borrowed adapters and HDMI cords in the conference room.